PCIe dual digitizer
for DSP
Eletter Product
The DRX16 is a mezzanine board that pairs with a PCIe main board to digitize two IF signals via two independent ports.
Custom FPGA-based DSP design, development, and integration services are available. For basic signal capture and spectral display, standard EDT firmware and software are included.
The board has a configurable Xilinx Virtex 6 LX FPGA (XC6VLX240T) and two identical ports for 2 to 300 MHz. The ports can be filled with two no-gain input direct modules (IDX, option A), or two fixed- gain input direct modules (IDX-FG, option B) with the same or different gain settings.
Each port has its own 16-bit ADC. Output is digitized by the ADCs and captured in the FPGA, which performs DSP or routes data to the main board.
Each port has a sample clock that is independently programmable from 10 to 130 MHz. A third clock is available via the sample clock I/O connector, which can be set as input or output.
The timebase can be the 10 MHz TCXO provided by EDT, or a user-provided source linked to the reference input. A reference output and a time code input (1 pps or IRIG-B) also are included.
The main board supplies DMA, plus additional memory and programmable FPGA resources.
Features
- Mezzanine board — pairs with an EDT main board (PCIe), which adds DMA, programmable FPGA resources, and memory
- Digitizes two IF signals (sampled independently) via two ports with 16-bit ADCs
- DSP: Custom FPGA-based design and integration services available
- FPGA: One programmable Xilinx Virtex 6 (XC6VLX240T)
- Ports: Two identical – each with one input direct module (IDX) for 2 to 300 MHz, with two gain options...
- Option A, two IDX modules: no gain
- Option B, two IDX-FG modules: fixed gain (it can be different on each module)
- ADCs: Two 16-bit (one per port)
- Sample clocks: Independently programmable for each port (10 to 130 MHz)
- Sample clock I/O: Programmable as input or output
- Timebase: 10 MHz TCXO or reference input, available via reference output
- Time code: 1 pps or IRIG-B input
Applications
- Wideband software-defined radio
- Real-time signal acquisition and analysis/test and measurement
- Surveillance/spectrum monitoring
- Adaptive signal processing
- High-speed filtering
Contact us to see how EDT technology can help you with your DSP applications.
Contact: John Dillon | Phone: 301-332-6510 | Email: [email protected]
Main Offices: 1400 NW Compton Drive, Suite 315 | Beaverton, OR 97006
Phone: 503-690-1234 or 800-435-4320 | Fax: 530-690-1243 | Website: www.edt.com