XMCM01 Marvell® ARMADA® XP (Quad ARMv7 core) based Single Board Computer in XMC form factor
Eletter ProductThe XMCM01 is the latest XMC form factor single board computer (SBC) to join GE Intelligent Platforms' wide range of mil/aero-targeted processing solutions.
Based on the Marvell ARMADA XP (Extreme Performance) series of multicore processors, the XMCM01 offers a low power solution to a wide range of SWaP-challenged applications.
The ARMADA XP series integrates up to four Marvell-designed ARMv7 compliant 1.6 GHz 32-bit CPU cores along with a host of I/O peripherals to offer one of the highest levels of integration in the industry. By employing advanced design methodology and process technology, the ARMADA XP delivers impressive performance per watt to empower applications across the mil/aero spectrum.
The ARMADA XP series supports SMP (symmetric multi-processing)/AMP (asymmetric multi-processing) modes with hardware cache coherency and 64-bit DDR2/DDR3 memory interface at 800 MHz clock rate (1600 MHz data rate) to enable very high-performance system design.
Designed specifically for harsh environments, the XMCM01 is ideal for mil/aero applications where high reliability and survivability are a must. Available in five air- and conduction-cooled ruggedization levels, the XMCM01 offers a low power solution either as a standalone SBC or as an incremental add-on to existing host cards.
The XMCM01 will be fully supported by comprehensive Deployed Test Software (BIT) with operating system support planned for VxWorks® and Open Source Linux®.
Features:
- Processor XMC, low power design (sub-10W variant)
- Marvell® ARMADA® XP (Extreme Performance) SOC Processor
- Up to 4x 1.6 GHz ARMv7 compliant 32-bit CPU cores (dual and quad core variants)
- High performance security engines
- Advanced power management
- Up to 2 GB DDR3 SDRAM with ECC
- 512 MB NOR Flash
- 512 kB non-volatile MRAM
- 2 GB NAND Flash
- x4 PCIe™ fabric via P15 connector
- Wide range of I/O via P16 connector
- 2x 10/100/1000BASE-T Ethernet
- 3x RS232/422 UARTs (optional 1x at front panel)
- 2x Serial ATA (3 Gbit/s)
- 2x USB 2.0
- 8x GPIO
- Air- and conduction-cooled variants
To speak with a GE Intelligent Platforms representative, please call 1-800-433-2682 or International: Country Code + 1 434 978 5100.
XMCM01 Product Page
XMCM01 Press Release
XMCM01 Datasheet
Connected Battlefield Blog
YouTube Playlist