Extreme Engineering Solutions' XPand4206 is a Rugged Intel? Core? i7-Based Multiprocessor COTS System with 10 Gigabit Ethernet Fabric
Eletter Product
The XPand4206 by Extreme Engineering Solutions (X-ES) is a high-performance computing and networking platform for environmentally demanding, SWaP-restricted avionics and vetronics applications. It maximizes processing performance with three quad-core Intel® Core™ i7 processors, each capable of operating at up to 2.1 GHz and provides a number of external I/O interfaces.
XPand4206 is one of many of Extreme Engineering Solutions' powerful rugged embedded systems.
Features
- Sub-½ ATR footprint: 4.88 in. (W) x 8.76 in. (L)
- Outer dimensions: 5.88 in. (W) x 13.39 in. (L) x 7.36 in. (H)
- 3U OpenVPX™-based (VITA 65) architecture
- Three quad-core Intel® Core™ i7 processors
- Intel® Active Management Technology (AMT) support
- Toolless, high-reliability, removable SSD memory modules
- 10 Gigabit Ethernet switched fabric
- Three external 10 Gigabit Ethernet interfaces
- Layer 2 managed network fabric (optional)
- Twelve high-speed CAN bus 2.0 A/B channels
- Twelve external Gigabit Ethernet ports
- Sixteen serial ports
- Six USB ports
- 28 VDC MIL-STD-704 or MIL-STD-1275 input power
Rapid Processing from a Variety of Standard COTS I/O
The XPand4206 provides a number of external I/O interfaces, including three 10 Gigabit Ethernet interfaces for high-throughput communication with other systems and sensors. The system also provides twelve high-speed CAN bus 2.0 A/B channels, twelve Gigabit Ethernet ports, sixteen serial ports, and six USB ports.
Secure, Removable Solid-State Storage
The internal 3U OpenVPX™ processor modules can communicate with each other, as well as with external devices, over a 10 Gigabit Ethernet switched fabric. The 10 Gigabit Ethernet fabric delivers full wire-speed across all of its ports and supports jumbo packets up to 12 kB. It also supports IPv6, Energy Efficient Ethernet (EEE), and a comprehensive set of IETF RFCs and IEEE protocols.
The XPand4206 includes two removable SATA Solid-State Drive (SSD) flash memory modules. The system’s toolless, removable SSD implementation has been tested and deployed in the most stressful environmental conditions. These memory modules include 256-bit AES hardware encryption, high-reliability connectors capable of thousands of insertions and extractions, and zeroization support.
About Extreme Engineering
Extreme Engineering Solutions, Inc. (X-ES), a 100% U.S.A.-based company, designs and manufactures Intel® and Freescale-based single board computers, networking products, storage products, power supplies, and system-level solutions for embedded computing customers. For further information on X-ES products or services, please visit our website: www.xes-inc.com, call +1 (608) 833-1155, or email us at [email protected].
